LG V-NET PLNWKB000 Installation & User Manual page 90

Installing ACP Lonworks
90
One of these two methods can be selected and used in the ACP Lonworks. And, if it is set by
the menu of the ACP Lonworks, the UI screen is differently displayed when accessing the web
screen to set the function. The ACP Lonworks should be set to the Demand function for the fol-
lowing cases:
- Interfacing with the AC Manager
NOTE
!
Default value
• The default value at factory ship-out is set to Peak.
Change the power control method as follows:
- When you press 'SET' button, menu screen will be displayed. Use up and down (▲, ▼) but-
tons of the ACP Lonworks to select [Contents], and press "SET" button again. While
[Peak/Demand] is selected, pressing "SET" button will display the screen to select peak or
demand method.
- Use up and down (▲, ▼) buttons to set the desired power management method.
If you press up (▲) button, it is set to demand method, and if you press down (▼) button, it is
set to peak method.
Click SET
button
Click SET
button
Example of setting to use demand function