LG V-NET PLNWKB000 Installation & User Manual page 105

- Insert USB memory or SD card into the ACP Lonworks. (Refer to software update and data
backup)
- Press "SET" button of the ACP Lonworks.
Select [Function] menu, and press "SET" button.
Select [DB recover] menu, and press "SET" button again.
Select [USB] or [SD card], and press "SET" button.
Remove USB memory after completing the data recovery.
ACP Lonworks is automatically restarted for data recovery.
PLNWKB000
CAUTION
!
• Before data recovery is completed, turning off the power of the ACP Lonworks or
removing USB memory or SD card may cause severe disorder of the ACP Lonworks.
Click SET
button
Click SET
button
Click SET
button
Automatic
restart of ACP
Installing ACP Lonworks
105