Table of Contents
Advertisement
- If you press "SET" button, whether to use the power display function will be applied to the sys-
tem.
But if there is no "SET" button input for certain time (about 10 sec.), the setting will not be
applied to the system, it returns to the previous screen, and the previously set method will be
used.
Setting whether to display error history
LG ACCS, which is the operation program of the ACP Lonworks, provides the error history func-
tion that can review several types of errors occurred in the air conditioner indoor units connected
to the ACP Lonworks. User may select whether to display the error history through LG ACCS at
his or her own convenience. To use the error history function, whether to use the function shall
be set in the ACP Lonworks. To set whether to use the error history function, please proceed as
in the following order.
- When you press the 'SET' button of the ACP Lonworks, menu screen will be displayed.
Use up and down (▲, ▼) buttons to select [Contents], and press "SET" button again.
While [LOG] is selected, if you press "SET" button, it will display the screen to set whether to
use the error history function.
PLNWKB000
- Use up and down (▲, ▼) buttons to set whether to use the error history function.
If you press up (▲) button, it will be set to use the error history function, and if down (▼) button
is pressed, it will be set to not to use the error history function.
PLNWKB000
Click SET
button
Click SET
button
Example of setting to use the error
Installing ACP Lonworks
history function
95
Advertisement
Table of Contents
