Table of Contents
Advertisement
Operating ACP Lonworks with ACCS
56
Installation
Changing outdoor unit information
When indoor unit address lock is set, central control address cannot
be changed from the indoor unit remote controller.
You can change the name of the outdoor unit, central control
address, outdoor unit capacity, and the number of the connected
indoor units. After changing the information, you must press
[Apply] button.
When you change the number of the connected indoor units, if
you input a smaller number than the number of the indoor units
already connected, the last input indoor unit is deleted first, and if
you input a larger number than the number of the indoor units
already connected, it will ask the first address of the indoor unit
to be added, and it will add the indoor units by the number of the
indoor units to be added by finding an empty address from the
input address one by one.
Advertisement
Table of Contents
