LG V-NET PLNWKB000 Installation & User Manual page 10

ACP LONWORKS FUNCTIONS AND SPECIFICATION
10
1 Cover
Front cover of the ACP Lonworks
2 RS-232 console port
Reserved communication port
3 Adaptor connection jack
Jack for DC 12V to connect to the power supply adaptor (not supported by PLNWKB100)
4 Power port
AC24V port for power connection (not supported by PLNWKB000)
5 Buttons and LCD
Buttons and LCD to set network environment and to display other information
6 Basic external input/output signal connectors
Connection ports to connect to external input/output signals (DI:2, DO:2)
7 RS-485 communication port
RS-485 communication ports to connect to air conditioner and ventilation equipment (4EA)
8 RS-485, LON communication ports and BMS connection button(SERVICE SWITCH)
RS-485 communication ports(2EA) and LON comunication port(1EA)
BMS connection button(SERVICE SWITCH)
9 Mini USB port
USB to Serial port for software debugging
10 USB port
For software update and data backup
11 Power switch
Switch to turn on or off the power of the ACP Lonworks
12 Ethernet port
Ethernet port to connect to internet and AC Manager
13 SD card slot
For RS-485 communication data backup.
CAUTION
!
If four times the power connector for the connection, as shown by using the right connec-
tion, but please note that an electric shock.
Use the designated parts must be connected to a power source.
※ Connector manufacturers: PHOENIX CONTACT
PartNo: MVSTBR 2,5 / 2-ST-5, 08 2P 5.00MM