Setting the module type of the ACP Lonworks
The following functions can be set module type by using the menu of the ACP Lonworks.
- Setting the module type
Before setting the module type of the ACP Lonworks
The module type setting of ACP Lonworks is set by using the LCD and button in front side of
ACP Lonworks.
Module information and menu of ACP Lonworks is displayed in LCD, it can be set or changed the
menu by pressing the SET,
CAUTION
!
• It is required a separate ACP Lonworks for each other product type(air conditioner, AHU
or Chiller).
ACP Lonworks can't to connect airconditioner indoor unit, AHU unit or Chiller unit at the
same time.
, up, down, left, right (▲, ▼, ◀, ▶) button.
PLNWKB000
Installing ACP Lonworks
107