Fagor Edesa 2006 Technical Manual page 6

t e c h n i c a l
2.- Features
The wash options must always be selected after
selecting the wash programme. Any change of
programme during the selection annuls the options
which were previously selected.
a) Spin selection and anti-crease (fl ot) button.
The selected programme has an associated spin
speed.
b) This can be modifi ed by pressing the spin button
repeatedly - the spin speed in revolutions will
decrease by 100 each time until 400 is reached.
c) Skip spin option. Press the spin button
once more to reach the skip spin option. This
programme, without a fi nal spin, is used to prevent
creases from forming when washing special
fabrics
d) Option: fl ot/anti-crease. This stops at the fi nal
rinse, leaving the clothing fl oating in water. When
the function is deactivated, the washer continues
the programme, draining and spinning. This is
used when you are not at home, for example,
to delay the spin until you have arrived so that
creases are not caused by the clothes being spun
and then left in the drum.
Time delay
Time delay selection. A delay of up to 24 hours
may be selected. The delay must be selected
after choosing the wash programme.
To select the time delay in hours press the clock
button. Each time the button is pressed delays
the start time by one hour. Cancel time delay To
cancel time delay press the clock button repeate-
dly. The delay will be cancelled by reaching 24 hours and then pressing once more.
Changing to another programme also cancels the delay.
3
Features
a
Select
b
Select
c
Select
d
Select
Select