Fagor Edesa 2006 Technical Manual page 17

t e c h n i c a l
Confi guring an Edesa Circuit:
When a circuit is replaced or changed, it must be confi gured.
To confi gure the circuit, follow these steps.
1.- Move the function selector knob to position 0.
LS-1136
indicated in the label stuck on the body of the washer's tray.
8.- Validate the confi guration by pressing the start/stop button until the intensive
wash, extra rinse and easy iron fl ash; the TSS test programme is then activated.
30º
40º
35º
LANA LA
Centrifug.
2.- Set the r.p.m. selector to position 2 (0 r.p.m.)
3.- Press the Start/Pause key and keep it pressed.
(P2) 4.- Keeping the Start/Pause button pressed, set the selector to
6 Kg.
programme nº 2 (cold position * ), and the end LED comes on.
5
4
5.- Keeping the Start/Pause button pressed, press the intensive
3
6
2
7
wash button, and the phase LEDs for the wash, rinse, and end
1
8
(Position 2)
come on. The LCD screen displays the letter A, and we release
1100 r.p.m.
the Start/Pause button and intensive wash button simultaneously.
EDESA 6.- Press the intensive wash button and the rinse LED fl ashes,
and E00 is displayed in the LCD screen. If it has no LCD screen,
the confi guration LEDs come on.
7.- Check that the LEDS which are lit correspond to the ones
O
Celeris 30
ALGODON COTON
200
100
30ºC
0
40º
Anti-
60º
arrugas/vincos
90º
Aclarado
Prelavado 60º
Enxag.
Description of operation
400
600
800
1100
LAVA.
r.p.m INTENSIVO
14
TIEMPO
SECADO
FÁCIL
PLA NCHADO
INICIO
PARO