Troubleshooting; T.s.s. Programme - Fagor Edesa 2006 Technical Manual

t e c h n i c a l

3.6.- Troubleshooting

3.6.1.- T.S.S. Programme

PROGRAMME
STOP
Note: Whenever it is necessary to go on to the next step, press the start/
pause button or turn the programme selector one position towards the right or
left.
Once the TSS programme has ended, the programme may be repeated by
pressing the START button.
Drying Motor Power supply + Resistance 1
1
Drying Motor Power supply + Resistance 1 and 2
2
Water input via Pre-wash electrically operated
1
Movement of wash motor with inversion
2
Water inlet via the electrically operated valve for
3
washing until wash level is reached
Heating resistance activated until 40 ºC is reached
4
Water intake through the three electrically
5
Emptying + movement of wash motor with
The programme ends and the selected wash
Description of operation
SELECTION MODE
(3.6 Amp)
(7 Amp)
valve +
Emptying + Spin
operated valves
inversion
programme is displayed
16
TIME
(approx)
5
seconds
5
seconds
15 sec.
6 min.
pressure
switch
level
10 min.
5 sec.
1.5 min.