Fagor Edesa 2006 Technical Manual page 18

t e c h n i c a l
6: 6 kg
KG options depending on circuit references /
washing machine model.
R.P.M. (Revolutions per minute).
These values depend on the hardware
reference and the KGs selected. 1400,
1300, 1200, 1100, 900, 800 ...
0: WITHOUT Recirculation Pump
00: WITH Recirculation Pump
If the circuit does not have this option it will
always be 0.
• Fagor T.S.S. Programme:
In order to check the operation of the washing machine's electric components,
the T.S.S. programme can be activated by following these steps:
1.- General ON / OFF switch (LCD off)
2.- Press the start / pause button and keep it pressed
3.- Hold down the ON/OFF switch until the LCD screen lights up.
4.- Press and hold down the select spin button and wait approx. 2/ 3 sec., until the
letter
5.- Release all buttons simultaneously
6.- Press the spin button and wait until the digits on the screen (LCD) appear
(the last button on the right flashes).
7.- Press and hold down the start / pause button
on the screen are flashing.
8.- The number 1 will be displayed on the screen – then follow the instructions in
table 1, below.
KG - Drum capacity
RECIRCULATION
is displayed on the screen
Description of operation
1
0: Cold water
8: Hot water
If the circuit does not have this option it will
always be 0.
2
DOOR OPENING
0: WITHOUT door opening
8: WITH instant door opening
If the circuit does not have this option it will
always be 0.
3
Circuit checking
Once the circuit has been configured, it is checked
by pressing the start/pause button for 3 sec. until
the digits stop flashing. After 3 sec. it exits the
configuration process, entering the TSS programme
entrando en el programa SAT (See table 1)
15
HOT WATER
(see table 1)
until all the digits
4
5
6