MULTIQUIP WHITEMAN SERIES Operation And Parts Manual page 27

TUB (BUCKET) DUMPING
NOTICE
DO NOT activate dump mechanism (tub/bucket) if
buggy is facing down hill. The possibility exist of the
buggy tipping over causing equipment damage and
severe bodily harm.
NOTICE
Releasing either one (dump control lever or pedal)
before dump is completed, will cause the tub to return
to the horizontal position.
TUB (BUCKET)
DUMP PEDAL
PRESS DOWN
TO DUMP
VERTICAL POSITION
DUMP PEDAL
LIFT UP TO
PLACE TUB IN
HORIZONTAL POSITION
WBH-16EF CE POWER BUGGY • OPERATION AND PARTS MANUAL — REV. #0 (09/19/18) — PAGE 27
METHOD 1
TUB (BUCKET)
TUB RETURN
METHOD 1
Figure 25. Tub Dumping
The hydraulic dump can be controlled by the hand dump
control lever or foot dump pedal.
1. To place the tub in the vertical position press down on
the dump pedal (Figure 25A) or move the dump control
lever forward (Figure 25B). The tub will move to the
vertical position as long as pressure is continuously
applied to the dump pedal or the dump control lever is
held in the forward position.
2. To return the tub to the horizontal position, simply place
your foot underneath the dump pedal (Figure 25C) and
lift or pull back on the dump control lever (Figure 25D).
DUMP
A
C
OPERATION
DUMP CONTROL LEVER
PUSH FORWARD TO PLACE
TUB IN VERTICAL POSITION
TUB DUMP
METHOD 2
DUMP CONTROL LEVER
PULL BACKWARDS TO PLACE
TUB IN HORIZONTAL POSITION
TUB RETURN
METHOD 2
B
D