6. If starting a warm engine or the temperature is warm,
place the choke lever (Figure 15) in the OPEN position.
CLOSE
Figure 15. Engine Choke Lever (Open)
7. Move the throttle lever halfway between the FAST and
SLOW position (Figure 16) for starting.
THROTTLE
LEVER
Figure 16. Throttle Lever
WBH-16EF CE POWER BUGGY • OPERATION AND PARTS MANUAL — REV. #0 (09/19/18) — PAGE 23
CHOKE
LEVER
OPEN
FAST SLOW
8. Place the ignition key (Figure 17 ) in the START position
and hold it until the engine starts. When the engine
starts, release the key, allowing it to return back to the
ON position.
Figure 17. Engine ON/OFF Switch
(Electric Start Models)
9. Make sure the choke lever has been placed in the
OPEN position (Figure 15) before operating the power
buggy.
10. Place the throttle lever in the FAST position
11. Before the buggy is placed into operation, run the
engine for several minutes. Check for fuel leaks, and
noises that would associate with a loose guard or cove.
OPERATION