15. Dump Control Lever — Use this lever forward to place
the tub in the dump position (vertical), move the lever
backward to return the tub to travel position (horizontal).
16. Engine — This machine uses an electric start 11.7HP
Honda engine.
17. Dump Pedal — Use this pedal to place the tub in the
dump position (vertical). Press pedal a second time to
return tub to the travel position (horizontal).
18. Rear Tires — Unit uses foam-filled tires. Reference
Table 1 for tire specifications.
19. Muffler — Used to reduce noise and emissions.
NEVER touch the muffler while it is hot. Serious burns
can result.
20. Forklift Pockets — Use these fork lift pockets to lift
the power buggy with a forklift. Remember to insert the
forks of the fork lift a minimum of 24 inches (610 mm.)
into power buggy's fork lift pockets.
WBH-16EF CE POWER BUGGY • OPERATION AND PARTS MANUAL — REV. #0 (09/19/18) — PAGE 17
25
24
22
Figure 3. WBH-16EF Power Buggy Components Continued
23
21
20
19
18
17
21. Fuse — 10 amp fuse that provides protection for the
horn circuit.
22. Charcoal Canister — Charcoal activated system
that absorbs or traps fuel vapors. Basic component
of evaporative emissions control systems.
23. Battery — Always use gloves and eye protection when
handling the battery.
24. Front Tires — Unit uses foam-filled tires. Reference
Table 1 for tire specifications.
25. Towing Hook — Use this hook to tow the buggy if it
gets stuck. This hook is NOT intended for towing the
buggy on public roads at high speeds.
COMPONENTS CON'T
15
16