MULTIQUIP WHITEMAN SERIES Operation And Parts Manual page 25

TRAVELING
1. With the engine running and parking brake released,
place the direction lever (Figure 20) in the forward
direction.
2. Squeeze the speed control lever (Figure 19) slightly
until the buggy begins to move in a forward direction.
Initially, let the buggy travel at about 3 MPH.
3. When using the buggy for the first time, test the brake.
With the right foot, step up and place it on the brake
pedal (Figure 21). Gradually apply pressure to the
brake pedal until the buggy comes to rest.
BRAKE PEDAL
Figure 21. Brake Pedal
4. Test the brake at different speeds until you are
comfortable with stopping the buggy. If the brakes
do not seem to stop the buggy adequately, refer to
the maintenance section of this manual for brake
adjustment instructions.
5. When starting and stopping is confirmed to be
functioning properly, the buggy is ready for operation.
WBH-16EF CE POWER BUGGY • OPERATION AND PARTS MANUAL — REV. #0 (09/19/18) — PAGE 25
STEERING
To steer the buggy, use the handle bar in front of the
operator platform.
1. To turn left when traveling in the forward direction, turn
the handle bar clockwise (Figure 22).
TURN HANDLE BAR
COUNTERCLOCKWISE TO STEER
BUGGY TO THE LEFT
Figure 22. Steering the Buggy
2. To turn right when traveling in the forward direction,
turn the handle bar in the counterclockwise direction.
CAUTION
DO NOT steer the buggy left or right when traveling up
or down on a grade. Travel in a straight path.
CAUTION
Avoid sudden and quick turns. When steering, turn
the handle bar slowly. Always face the controls when
traveling.
OPERATION
TURN HANDLE BAR
CLOCKWISE TO STEER
BUGGY TO THE LEFT