Maintenance/Syslog - Grandstream Networks WP810 Administration Manual

Firmware Server
Password
Firmware File Prefix
Firmware File Postfix

Maintenance/Syslog

Syslog Protocol
Syslog Server
Syslog Level
Syslog Keyword
Filtering
Send SIP Log
The password for the firmware server.
Enables your ITSP to lock firmware updates. If configured, only the firmware
with the matching encrypted prefix will be downloaded and flashed into the
phone.
Enables your ITSP to lock firmware updates. If configured, only the firmware
with the matching encrypted postfix will be downloaded and flashed into the
phone.
If set to SSL/TLS, the syslog messages will be sent through secured TLS
protocol to syslog server.
Default setting is UDP.
Note: The CA certificate is required to connect with the TLS server.
The URL or IP address of the syslog server for the phone to send syslog
to.
Note: By adding port number to the Syslog server field (i.e.
172.18.1.1:1000), the phone will send syslog to the corresponding port of
that IP.
Selects the level of logging for syslog.
The default setting is "None". There are 4 levels: DEBUG, INFO,
WARNING and ERROR.
Syslog messages are sent based on the following events:

Product model/version on boot up (INFO level).

NAT related info (INFO level).

sent or received SIP message (DEBUG level).

SIP message summary (INFO level).

inbound and outbound calls (INFO level).

registration status change (INFO level).

negotiated codec (INFO level).

Ethernet link up (INFO level).

SLIC chip exception (WARNING and ERROR levels).

Memory exception (ERROR level).
Syslog will be filtered based on keywords provided. If you enter multiple
keywords, it should be separated by ','. Please note that no spaces are
allowed.
Configures whether the SIP log will be included in the syslog messages.
The default setting is "No".
Note: By setting Send SIP Log to Yes, the phone will still send SIP log from
syslog even when Syslog Level set to NONE.
WP810 Administration Guide
Version 1.0.1.1
P a g e | 52