Clock Functions - AEG BSE574221M User Manual

If you put too much water
into the tank, the safety
outlet moves the excess
water to the bottom of the
oven.
Remove the water with a
sponge.
6.8 Emptying the water tank
CAUTION!
Make sure that the oven is
cold before you start to
empty the water tank.
1. Prepare the draining pipe (C),
included in the package with the user
manual. Put the connector (B) onto
one of the ends of the draining pipe.
2. Put the second end of the draining
pipe (C) into a container. Put it at a
lower position than the outlet valve
(A).

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock func-
tion
TIME OF DAY
A
B
C
Application
To show or change the
time of day. You can
change the time of day
only when the oven is off.
3. Open the oven door and put the
connector (B) into the outlet valve
(A).
4. Push the connector again and again
to empty the water tank.
The water may remain inside after
the display shows:
water flow from the water outlet
valve stops.
5. Remove the connector from the valve
when the water stops flowing.
Do not use the drained
water to fill the water tank
again.
Clock func- Application
tion
To set how long the oven
works. Use only when a
DURATION
heating function is set.
To set when the oven
turns off. Use only when a
END
heating function is set.
ENGLISH 11
Wait until the