Table of Contents
Advertisement
Haes Systems Ltd, Columbia House, Packet Boat Lane, Cowley Peachey, Uxbridge, UB8 2JP
Model Number
Excel-EN 2-12 zone conventional panel XLEN-2/4/6/8/12
Control and indicating equipment for fi re detection and fi re alarm systems for buildings.
Output to fi re alarm devices, dependency types 'A', 'B' & 'C', delays to outputs, test condition
Power supply equipment for fi re detection and fi re alarm systems for buildings.
PLEASE READ THIS MANUAL BEFORE HANDLING THE EQUIPMENT AND
THIS PARTICULARLY APPLIES TO THE PRECAUTIONS NECESSARY TO AVOID
!
IMPORTANT SAFETY NOTES
The panel is safe to operate provided it has been installed in compliance with the manufacturer's instructions
The panel is safe to operate provided it has been installed in compliance with the manufacturer's instructions
and used in accordance with this manual.
and used in accordance with this manual.
Hazardous voltages are present inside the panel—DO NOT open it unless you are qualifi ed and authorised
Hazardous voltages are present inside the panel—DO NOT open it unless you are qualifi ed and authorised
to do so. There is no need to open the panel's enclosure except to carry out commissioning, maintenance
to do so. There is no need to open the panel's enclosure except to carry out commissioning, maintenance
and remedial work. This work must only be carried out by competent service personnel who are fully
and remedial work. This work must only be carried out by competent service personnel who are fully
conversant with the contents of the panel's installation manual and have the necessary skills for maintaining
conversant with the contents of the panel's installation manual and have the necessary skills for maintaining
this equipment.
this equipment.
This fi re alarm system requires periodic checks as specifi ed in BS 5839 Part 1 It is the responsibility of the
This fi re alarm system requires periodic checks as specifi ed in BS 5839 Part 1 It is the responsibility of the
system user to ensure it is regularly serviced and maintained in good working order.
system user to ensure it is regularly serviced and maintained in good working order.
Disclaimer
Disclaimer
No responsibility can be accepted by the manufacturer or distributors of this fi re alarm panel for any
No responsibility can be accepted by the manufacturer or distributors of this fi re alarm panel for any
misinterpretation of an instruction or guidance note or for the compliance of the system as a whole. The
misinterpretation of an instruction or guidance note or for the compliance of the system as a whole. The
manufacturer's policy is one of continuous improvement and we reserve the right to make changes to
manufacturer's policy is one of continuous improvement and we reserve the right to make changes to
product specifi cations at our discretion and without prior notice. E & O E.
product specifi cations at our discretion and without prior notice. E & O E.
0832
13
European Standard EN54-2 : 1997 + A1 : 2006
Provided Options (with requirements):
European Standard EN54-4 : 1997 + A1 : 2002 + A2 : 2006
IMPORTANT NOTE
OBSERVE ALL ADVICE GIVEN IN IT
E.S.D
CPD Number
0832-CPD-2177
ATTENTION
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Excel-EN and is the answer not in the manual?
Questions and answers