Adleepower AP2G3-337 Instruction Manual page 82

Power device failure 3
PF03
Power device failure 4
PF04
B. Operation errors
Parameter Locked
OPE1
FWD or REV only
OPE2
Analog signal input only
OPE3
Terminal command only
OPE4
Power device failure during
deceleration (stopping).
Power device failure during stand-by.
To change the contents of
CD02~CD52 set CD01=press
first.
Motor direction limiter.
See functions description CD08.
Motor speed command from control
terminal only.
Input analog signal by Frequency
knob.
See functions description CD10.
Accept run command from control
terminal only.
Not operation panel.
See functions description CD12.
80
ENTER