Adleepower AP2G3-337 Instruction Manual page 48

Auto running mode
CD58
SPEED
SPEED SETTING
TIMER SETTING
CD12=0, use keypad to control timer
CD12=0 and CD13=2, use RS485 to control timer
CD42 or CD43=10, use FT1 or FT2 terminal to control timer
Value
0 Timer disable
1 Speeds with timer for one cycle then stop
2 Speeds with timer for running continually until receive stop command
Speeds with timer for one cycle then stop. There is a stop between each
3
speed.
Speeds with timer for running continually until receive stop command.
4
There is a stop between each speed.
FT1/FT2 "ON", for timer RUN.
FT1/FT2 "OFF", for timer STOP.
FT1/FT2
Timer
Setting Range
Factory Setting
1 th 2 th
CD47 CD48 CD49
CD59 CD60 CD61
3 th 4 th 5 th
CD50 CD00
CD62 CD63
Description
46
0 ~ 4
0
VALUE
UNIT
RANGE
0 ~ 400 Hz
0 ~ 15.00 hr.min