Figure 4-3 Gland Plate Or "Knockout" Removal; Figure 4-4 Fitting Gland Fixing Plates - Siemens COMBIMASTER 411 Operating Instructions Manual

Issue 03/02
Figure 4-3
6. Remove any sharp edges/burrs/swarf in the knockouts and terminal housing.
7. Slide the fixing plates into the slots provided immediately behind the gland
access holes (as shown in Figure 4-4).
Figure 4-4
8. Ensure that the earth lead is fed back through the fixing plate.
9. Feed the earth lead into the PROFIBUS Module housing.
10. Replace the Filter Module.
PROFIBUS Communication Module
6SE6400-5AV00-0BP0
Gland Plate or "knockout" Removal
Fitting Gland Fixing Plates
Operating instructions
CONNECTION
33