Siemens COMBIMASTER 411 Operating Instructions Manual page 46

CONFIGURATION
NOTE
Process data whose complete control word (PZD1) is set to zero are not
transferred from the PROFIBUS Module to the inverter.
Result: Alarm A703 and possibly fault 70.
P0927 – Modification Source for Parameters
This parameter can be set to define the sources of parameter modifications.
Bit 0
Bit 1
Bit 2
Bit 3
The default setting for all bits is 1, i.e. parameters can be modified from all sources.
46
PROFIBUS-DP
BOP
PC-inverter assembly set
(USS on the BOP interface)
Local RS-485 interface (terminal
14/15 and USS)
PROFIBUS Communication Module
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
Operating instructions
6SE6400-5AV00-0BP0
Issue 03/02