Siemens COMBIMASTER 411 Operating Instructions Manual page 5

Issue 03/02
Further information can be obtained from Internet website:
http://www.siemens.de/micromaster
Approved Siemens Quality for Software and Training
is to DIN ISO 9001, Reg. No. 2160-01
The reproduction, transmission or use of this document, or its
contents is not permitted unless authorized in writing.
Offenders will be liable for damages. All rights including rights
created by patent grant or registration of a utility model or
design are reserved.
© Siemens AG 2002. All Rights Reserved.
®
MICROMASTER , COMBIMASTER 411
®
MICROMASTER 411 are registered trademarks of Siemens
Order number: 6SE6400-5AK00-0BP0
Printed in the Federal Republic of Germany
PROFIBUS Communication Module
6SE6400-5AV00-0BP0
Other functions not described in this document may be
available. However, this fact shall not constitute an obligation
to supply such functions with a new control, or when
servicing.
We have checked that the contents of this document
correspond to the hardware and software described. There
may be discrepancies nevertheless, and no guarantee can be
given that they are completely identical. The information
contained in this document is reviewed regularly and any
necessary changes will be included in the next edition. We
welcome suggestions for improvement.
®
and
Siemens handbooks are printed on chlorine-free paper that
has been produced from managed sustainable forests. No
solvents have been used in the printing or binding process.
Document subject to change without prior notice.
Siemens-Aktiengesellschaft.
Operating instructions
DESCRIPTION
5