System Settings Setup (Display & Workout Limits); Tv Channel Guide Setup; Media Adapter Console Setup; Verify The Console Operation - Precor Experience Series Service Manual

System Settings Setup (Display & Workout Limits)
This procedure configures the Display and Workout Limits settings.
1. If you have a previously cloned System Settings USB drive or you can create one from
another configured machine, then import the System Settings, see
Settings" on page 31
cedure.
2. Verify that each of the Display settings are set to the facility settings, select System Set-
tings > Display, see
Default Language (default English)
l
Measurement Units (default US Standard)
l
Standby Mode Delay (default 15 minutes)
l
3. Verify that each of the Workout Limits are set to the facility settings, select System Set-
tings > Display, see
Maximum Workout Duration (default 120 minutes)
l
Maximum Pause (default 30 seconds)
l
Summary Time Out (default 60 seconds)
l
CrossRamp Auto-Level [EFX (default 1), TRM (default 0)]
l

TV Channel Guide Setup

This procedure configures the TV Channel Guide
Note: This procedure assumes that the facility TV service provider has provided a
console compliant TV RF input signal.
Select one of the following methods to configure the TV Channel Guide:
1. If you have a previously cloned TV Channel Guide USB drive or you can create one
from another configured machine, then import the Channel Guide, see
Channel Guide" on
2. If you cannot import an existing Chanel Guide, then use the SCAN fundtion to create a
new Channel Guide from the TV RF input signal, see
Guide" on page 35.

Media Adapter Console Setup

Use this procedure to setup and configure a media adapter console.
1. For media adapter setup and configuration information, see
on page 38.

Verify the console operation

1. Verify console operation and return to service, see
and skip to "TV Channel Guide Setup"
"Display menu" on
"Workout Limits menu" on
page 33.
4 Console Installation and Removal
below. If not, continue pro-
page 54.
page 56.
"Scanning the TV Channel
"Media Adapter Consoles"
"Operation Verification" on
Installation Procedure
"Cloning the System
"Cloning the TV
page 14.
28