Error Log
The R40 console captures and stores equipment error events codes and related information in the Display Error
Log page. Error Log information provides useful diagnostic information to help maintain and troubleshoot issues.
Error Log information is also useful when contacting Precor Service to resolve an issue.
Accessing the Error Log
Go to the Home page, select Settings > Information > Error Log, see
Understanding Display Error Log Information
Display Error Log Table Parameters
Parameter
Sequentially generated number indicating the order in which the error code events occurred in
Error
time, 001 is the first listed event code (oldest) to be logged continuing to the last number
"nnn" (most recent) error code to be logged.
The alpha-numeric code "C-001-nnn" representing the error event. Where the C-001 prefix
identifies valid service error codes and "nnn" is the code number, Disregard any other
Code
code prefix error codes. See
Data
Disregard this entry.
Odometer
Odometer reading when the error event occurred.
Time
Time the error event occurred.
Date
Date the error event occurred
Clearing the Error Log
The Error Log history is cleared by 1) running the Hardware Validation "Error Log Reset" systems test and 2)
cycling the input power.
1. Go to the
Hardware Validation Systems Tests
Software.
Accessing Service
Description
Error Codes
for listing of error codes and description.
page (Service Access Code 51765761), see Accessing Service
Software.
Page 12