Cpa Event Log; About; Accessing The Error Log & Cpa Event Log; Using The Cpa Event Log (P62, P80, And P82 Consoles) - Precor Experience Series Service Manual

CPA Event Log

About

On P62, P80, and P82 consoles, service error codes are viewed on the CPA Event Log
menu.
IMPORTANT: On P62, P80, and P82 consoles, use the CPA Event Log and not the
Event Log for viewing machine troubleshooting error codes, refer to the
Troubleshooting Guide
Always review the Error Log or CPA Event Log when troubleshooting an issue. The error logs
will contain any triggered error code events and related information. You can then refer to
Error Code Troubleshooting Guide
tomer service for assistance, refer to the Error Log or CPA Event Log for additional inform-
ation to help the representative resolve the issue.
Note: Be aware that not all machine failures will cause an error code event. Use phys-
ical observation and mechanical troubleshooting skills to resolve non error code
issues.
Error event codes are sequentially stored as a table in memory in a First-In Last-Out basis, the
newest error code is stored in the number one position pushing any current error codes down
one position. When the memory is full, the oldest error code is pushed off the stack and
removed from memory.
When an error event is detected, the error code information will be stored into the error log or
CPA Event Log. However, when multiple instances of the same error code event occur within
the same Hour or Odometer reading, only the first occurrence will be logged. Either the one
hour limit is exceeded, or a change to the Odometer mileage, or a different intervening error
code is logged must occur before the same repeating error code is logged again.
Note: Multiple repeating instances of the same error code event occurring during
the same Hour or Odometer reading will only be logged as a single error code event.
Accessing the Error Log & CPA Event Log
On P62, P80, and P82 consoles access the error codes using the CPA Event Log.
P62, P80, and P82: Access Hardware Validation (51765761) > select About > CPA Event
Log
Note: Unlike the Error Log, error codes cannot be manually removed from the CPA
Event Log.

Using the CPA Event Log (P62, P80, and P82 consoles)

Each logged machine error code will be shown on the CPA Event Log menu. Use the touch-
screen vertical scrollbar to scroll up/down thru the list of error codes.
for error code description and troubleshooting information.
to help resolve the issue. Also, when calling Precor cus-
9 Troubleshooting
CPA Event Log
Error Code
70