Description Of Buttons; Preparations For Remote Control - AEE AP10 User Manual

AEE Aerial Photography Equipment
Professional·Advanced

Description of Buttons

Name of button
Slide switch S1
Slide switch S2
Slide switch S3
Slide switch S4
Left joystick
Right joystick
Airborne recording
button
Airborne shutter button A photo is taken when it is pressed once.
Recording stop button
Power switch
Joystick calibration mode:
Turn the slide switch S2 to "ADJ" position, and turn the left and right joysticks clockwise in full scale for two circles;
then turn S2 to "OK" position to complete joystick calibration.

Preparations for Remote Control

Installation of repeater
The installation method is shown in the following figure: insert the repeater by aligning its bottom jack with the
adapter; insert the screw into the round hole, and then use the cross-head screwdriver to tighten it.
Installation of mobile phone stand
The installation method is shown in the following figure: snap in the mobile phone stand by aligning with the slot.
Description of function
1. Up (OFF): non-lock normal flight; 2. Middle (CL): course lock; 3. Down (HL): home lock
1. Up (OK): normal flight; 2. Middle (NULL): reserved; 3. Down (ADJ): enable joystick
adjustment
1. Up (UP): the airborne camera lens moves up when your hand stays at this position,
and the switch rebounds to the middle position when you move away your hand; 2.
Middle (STOP): stop the airborne camera lens; 3. Down (DOWN): the airborne camera
lens moves down when your hand stays at this position, and the switch rebounds to the
middle position when you move away your hand
1. Up (AC): auto fly (GPS) mode; 2. Middle (MC): manual fly mode; 3. Down (NULL):
reserved
It is used to control course and throttle: left/right for course, up/down for throttle
It is used to control pitch and roll: up/down for pitch, left/right for roll
The airborne camera begins video recording when it is pressed once.
The airborne camera stops recording when it is pressed once.
ON/OFF indication of the remote control power switch: slide leftwards to turn it OFF; slide
rightwards to turn it ON.
- 10 -