Preparations Before Take-Off; Control Flight With Remote Control; Guide For Components Of Remote Control And Description Of Their Functions - AEE AP10 User Manual

Turn on the power switch on the aerial photography equipment. At this moment, the 4 arm lights (two red lights, two
green lights) are constantly on; the tail light (red) turns off 5~10s after turning on; meanwhile, the motors make "beep"
sounds.

Preparations before Take-off

Before use of AP10, please first install the propellers. Check the entire equipment to see if it is complete and secure
and if any screw is loosened. Please install the clockwise and counter-clockwise propellers properly, and make sure
the aerial photography equipment and the remote control have sufficient battery level.

Control Flight with Remote Control

The remote control is specially developed for AEE aerial photography equipment to make it convenient for controlling
the flight of the equipment. The remote control can independently control the flight of the aerial photography
equipment and allows you to view real-time videos recorded by the aerial photography equipment on your mobile
phone via Wi-Fi network.

Guide for Components of Remote Control and Description of Their Functions

Mobile phone support
Photographing indicator (green)
Slide switch S2
Reserved button
Slide switch S1
Power indicator (red)
Strap hole
Left joystick
Airborne recording
button
Power switch
Antenna
AEE
- 9 -
Aerial Photography Equipment
Professional·Advanced
Repeater
Slide switch S3
Slide switch S4
Recording indicator (blue)
Right joystick
Airborne shutter button
Recording stop button