Connect App; Instructions On How To Operate Wi-Fi Control Interface - AEE AP10 User Manual

normal working status.
4. Use a needle-like object to press the "RESET" button of the repeater until the WiFi signal indicator turns off; then
loosen the "RESET" button.
5. Wait for about 30s; then the WiFi signal indicator (blue) flashes (indicating the repeater has acquired the SSID
and MAC address of the airborne DV), and the repeater enters the binding state; in case of unsuccessful pairing,
repeat Step 3-5 until pairing is successful.
6. Find the repeater in the WiFi list on the mobile device and connect it; the name of the repeater is DW12, and the
default password is 00000000.

Connect App

Click on the app icon "
Note: In case of unsuccessful connection, an error icon will appear; you can click again for reconnection.
Remote operation of the camera can be realized by clicking on the corresponding icon in the app control interface.

Instructions on How to Operate Wi-Fi Control Interface

1. Video Recording
Click on the video recording icon "
video recording, and the icon displayed is "
displayed is " ". Enter the full screen by clicking on the screen, and exit the full screen by clicking on the screen
again.
2. Photographing
Click on the photographing icon "
photos; during photographing, the icon displayed is "
" ".
3. Snapshot
Click on the snapshot icon "
during photographing, the icon displayed is "
" to enter the app connection interface; click to enter the app control interface.
(App connection interface)
", and the current state icon displayed is "
", and the current state icon displayed is "
", and the current state icon displayed is "
(App control interface)
". Click on " " once again to stop video recording, and the icon
"; after photographing is finished, the icon displayed is
"; after photographing is finished, the icon displayed is "
- 19 -
AEE Aerial Photography Equipment
Professional·Advanced
". Click on "
". Click on "
". Click on " " to take photos;
" to turn on
" to take
".