Product.description; Precautions.for.uav.use - AEE CONDOR series User Manual

aee.com
Product Description
CONDOR is a hi-tech electronic product integrated with flight and photography functions, equipped with the
integrated three-axis gimbal camera and advanced intelligent flight control system. With the APP on your
mobile device, you can receive the video recorded by the 16-megapixel onboard camera and the flight data of
the UAV in real time and control the onboard camera remotely.
(1) The outstanding performance of this product relies on our original accessories. We shall not be held
liable for any loss or damage caused by using any other accessory.
(2) Equipped with the intelligent control system, this product will enter a safe working state if powered on.
However, we recommend you remove the propellers before performing the calibration or setting any
parameter.
(3) Make sure the power supply system and other functional modules are installed properly before using this
product. Remove the propeller blades and keep the UAV away from the crowd and vulnerable, fragile and
hazardous materials before performing the calibration.
Precautions for UAV Use
Check the following items one by one before each flight:
(1) Check if all components are in good condition. Do not start the flight if any component is aged or
damaged.
(2) Make sure the UAV battery and remote control battery are fully charged.
(3) To prevent communication interference, do not use 3 or more UAVs simultaneously in an area (of football
field size) or use the UAV near 3 or more high-power 2.4G (Wi-Fi) equipment.
(4) Make sure the UAV will fly at the specified load.
(5) Power on the UAV and remote control in no particular order before taking off. Power off the UAV and
remote control successively after landing.
(6) Check if the propellers and motors are installed properly and reliably. Make sure the forward-rotating
propeller and counter-rotating propeller are put in their places. To prevent cuts, do not get close to or
come into contact with the rotating motors or propellers.
(7) Make sure no person or any other obstacle in the circle about 5m~10m around the take off point before
taking off or landing.
(8) Select a open flying space with no tall buildings around and the compass work will be affected by
buildings that use steel bars.
(9) This UAV cannot be used in the Antarctic circle or Arctic circle.
(10) Select a safety zone away from the crowd, obstacles, high-voltage wires and no-fly zones for the flight
and take care of yourself.
(11) Do not answer calls when your mobile phone is connected to the UAV or remote control via Wi-Fi for
image preview.
(12) To prevent communication errors, do not use this product in complex electromagnetic environments.
(13) To prevent component damage or unpredictable consequences caused by inside vapor condensation, do
not use or store this product in humid environments.
(14) For your safety and product safety, do not use this product in poor weather conditions such as lightning,
rain, snow, strong wind or sandstorm.
(15) To protect its thermoplastic materials against accelerated aging, deformation and melting at high
6