Instructions On Use Of The Repeater - AEE AP10 User Manual

AEE Aerial Photography Equipment
Professional·Advanced
4. Setting
Click on the setting icon "
setting.
(1) Recording setting
Click the "Resolution" option to set the desired video resolution: (PAL system) 1920×1080P 025f, 1280×0960P
048f/025f, 1280×0720P 050f/025f, 0848×0480P 100f/050f; (NTSC system) 1920×1080P 030f, 1280×0960P
048f/030f, 1280×0720P 060f/030f, 0848×0480P 120f/060f.
Click the "Viewing Angle" option to set the desired viewing angle (Wide, Medium, Narrow, Small).
Click the "Bit Rate" option to set the desired bit rate (Normal, High Bit Rate)
(2) Photographing setting
Click the "Resolution" option to set the desired picture resolution (8.0M, 12.0M, 16.0M).
Click the "Snapshot" option to set the desired number of pictures to be taken by snapshot (3PCS, 6PCS, 10PCS).
(3) Parameter setting
Click the "Tone" option to set the desired tone (OFF, Standard).
Click the "Front State Indicator" option to set the desired front state indicator (Full ON, Full OFF).
Click the "Video Content Cyclic Overlay" option to set the corresponding cyclic overlay state (OFF, ON).
Click the "TV Output Format" option to set the desired output format (PAL, NTSC).
Click the "Language" option to set the desired language (10 languages such as Traditional Chinese, Simplified
Chinese and English).
Click the "Date/Time" option to set to the current date/time of the mobile phone.
Click the "Format Memory Card" option to select formatting or not formatting the memory card.

Instructions on Use of the Repeater

1. Product structure and appearance
1.2 Interface definitions:
[1] WiFi signal indicator: It is blue when the connection is normal.
[2] Working indicator: It is green when the device is working after power-on. When the battery is being charged after
power-off, it flashes quickly in red; when the battery is fully charged, it is constantly on in red.
[3] Power switch: It is used to power ON or OFF the device.
[4] Binding button: Binding between the repeater and the camera will be triggered when this button is pressed.
[5] USB port: Charging port.
1.3 Specifications
Battery: 1600mAh
" to change the parameters of recording setting, photographing setting and parameter
USB port
Binding button
Power switch
Working indicator
WiFi signal indicator
- 20 -