Connect Battery To Charger; List Of Components - AEE AP10 User Manual

AEE Aerial Photography Equipment
Professional·Advanced

Connect Battery to Charger

Connect the battery to the charger according to the steps shown below:
Step
Step 1:
Step 2:
Step 3:
To avoid short circuit resulting from misoperation, DO NOT pull out the charger wires during charging.

List of Components

The following components are included in the package of this product. Please check carefully at the time of purchase.
In case of any missing component or damage, please feel free to contact us.
Aerial photography equipment:
1set
Illustration
Charging state indicator
Charging state indicator
Remote control: 1 set
- 4 -
As shown in the figure, insert the plug
at one end of the charger by aligning it
with the battery.
Connect the plug at the other end of
the charger to a 100~240V AC power
outlet; at this moment, the charging
state indicator turns red, indicating
that charging begins.
If the charging state indicator is
constantly on in green, the battery has
been fully charged. After charging is
finished,
charger from the 100~240V AC power
outlet.
Charger: 1 set (including
power cable and charger
connecting wires)
Description
please disconnect
5300mAh power battery
case for flight: 1pc
the