Bolt Torque - Yetter MAVERICK HR PLUS 2984 Series Operator's & Parts Manual

Note: Right hand and left hand designations are based on sitting in the tractor and facing forward.
READ THESE INSTRUCTIONS FIRST:
1. Improperly tightened bolts will result in damage, breakage, expense, and down time.
2. Always replace bolts with the specified grade and type.
3. Torque properly before first use of the machine and every 2-4 hours of use until you are sure bolts
are staying tight.
4. The chart below is a guide for proper torque.
elsewhere in the manual.
5. Torque is the force you apply to the wrench handle or the cheater bar, times the length of the
handle or bar.
6. Use a torque wrench whenever possible.
The following table shows torque in ft. lbs.
Lubricate all bearings and moving parts as assembled and make certain that they work freely.
WARNING:
without using safety lockups.
CAUTION:
attention to lifting techniques while handling and or maneuvering the opener during
assembly. Failure to do so may lead to personal injury.

BOLT TORQUE

Never work around the toolbar / implement while in a raised position
The MAVERICK OPENER™ and its attachments are very heavy. Extra
Use it unless a specified torque is called out
5