Auriol AHFL 433 A1 Operating Instructions Manual page 20

Switching the channel display on the weather station
When the weather station has received the signal from the out-
door sensor, it automatically shows the corresponding channel .
However, you can also manually set the display of the different
channels .
♦
Only the values from outdoor sensors that are connected to the
weather station are shown. If you use multiple outdoor sensors,
choose a different channel for each outdoor sensor.
■
_291952_AHFL433A1_WeatherStation_LB9.indb 20
Press the control surface
between displays
show channel 2),
(rotate between all channels in a loop) .
│
20
US - EN
4 repeatedly to switch
(only show channel 1),
(only show channel 3) and
(only
AHFL 433 A1
08.05.18 13:2