System Management - Thermo Scientific TSX Series Installation And Operation Manual

Ultra low temperature freezers
Table of Contents

Advertisement

9.9 System Management

Thermo Scientific TSX Ultra Low Temperature Freezers
If you prefer a display language other than English, press the correct radio
button. Press the °F radio button if you want to change the display temperature
from Celsius to Fahrenheit.
To set date, time, and 24hr/AM-PM display format, press each numeric display
you wish to change. Up and down arrows will then appear which you can use to
change values.
Click the check mark icon to confirm changes and press Next when ready.
Pressing the System Management icon (refer to Figure 11) brings up the
following screen:
Figure 19. System Management Settings
Use this screen to upload and download configurations and user applications
using a USB flash drive. The USB port is directly to the right of the display.
Upload Configuration File: Insert USB drive to upload system settings
Download Configuration File: Insert USB drive to download system
settings.
WARNING: Do not upload non Thermo Scientific approved files. This
can cause the User Interface to become inoperable and require a qualified
service technician to repair.
Upload User Application: Insert USB drive to upload software updates.
Configuration files may be uploaded to other freezers.
Maximum power rating for USB flash drives is 500mA.
The Copy Files option is used to copy files to the SD card (user interface).
For information on exporting temperature and event data, refer to Section 10.6.
Installation and Operation Manual
Operation
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents