Thermo Scientific TSX Series Installation And Operation Manual page 59

Event Log Entry Detail
Event Name
Reset to Factory Settings
Remove User Event
SD Card Not Found
Sensor: Out of Range (OOR) General
Set Point Setting Change
Shut Down Unit
Switch Mode Fully Accessible
/ Secure Mode
System Battery PM Expired
System Battery PM Reset
Temperature Excursion Reset User
Temperature Log Rollover
User Login/Off
Voltage/Frequency Mismatch General
Warm Alarm Setting Change User
Thermo Scientific TSX Ultra Low Temperature Freezers
Event Log Type/Icon
Event
User
Event
User
Event
User
Battery
User + Battery
General
User
Event Field-Intelligent Text Detail
All settings reset to factory defaults.
User and user removed.
Failed to connect to SD card.
Which sensor(s) are currently out of range.
User who made the change (secure mode only) and the
to/from set point.
Unit has been shut down (date/time).
User who made the change (secure mode only) and the
to/from operational mode.
Battery replacement period expired.
Value of the counter prior to reset and who performed the
reset (secure mode)
User who reset and the value reset to.
The earliest date remaining in the Temperature Log.
Username and indicate if the logoff was a timeout.
Measured voltage and frequency.
User who made the change (secure mode only) and the
to/from warm alarm set point.
Appendix B: Event Log Detail
Installation and Operation Manual 55