8.5 New User Entry
Thermo Scientific TSX Ultra Low Temperature Freezers
Note This Selection can only be made during the start up procedure. After start
up, you can only change security mode by restoring factory defaults and shutting
down the freezer. Refer to Section 9.5.
If you wish to change the default, use the radio button to change to Secured.
Press the check mark icon to confirm.
Press Next when ready.
If you have selected Secured mode, you will need to create at least one account
with Administrator privileges and the following screen will be displayed:
Figure 6. New User Entry Screen
•
Name (required): 4-10 characters, case sensitive. Any valid keyboard
characters are permitted.
•
Given Name (optional): 1-25 characters.
•
Password (required): 4-10 characters, case sensitive. Any valid keyboard
characters are permitted.
•
Type (required): Select Admin. The first user must be an administrator.
•
E-mail (optional): Maximum 40 characters.
•
Telephone (optional): Maximum 20 characters, numeric only.
•
Access Card ID (optional): Proximity Access Card ID number.
Installation and Operation Manual
Start Up
17