Start Up; Initial Start Up - Thermo Scientific TSX Series Installation And Operation Manual

8 Start Up

8.1 Initial Start Up

Thermo Scientific TSX Ultra Low Temperature Freezers
To start up the freezer, complete the following steps:
1. Plug the freezer into the power outlet.
2. Turn the power switch in back of the freezer, on the bottom right, to the
ON position.
3. When the freezer is powered up, you will see a logo displayed on the
front screen for about 25 seconds, followed by a Regional Settings
screen:
Figure 2. Regional Settings Screen
This screen allows you to specify the preferred display language along with date,
time and temperature display preferences. If you prefer a display language other
than English, press the correct radio button. Press the °F radio button if you want
to change the display temperature from Celsius to Fahrenheit.
To set date, time, and 24hr/AM-PM display format, press each display you wish
to change. Up and down arrows will then appear which you can use to change
values.
On this and all other screens, a check mark icon will appear whenever you
change values. Always be sure to press the check mark icon to confirm
changes before navigating away from a screen.
Press the check mark icon to confirm changes. Press Next when ready.
Installation and Operation Manual
Start Up
13