Unit Name (Optional) - Thermo Scientific TSX Series Installation And Operation Manual

Start Up
8.2 Unit Name
(Optional)
14 Installation and Operation Manual
4. A sequence of screens then asks you to verify that:
• The freezer is properly grounded and connected to a dedicated power
source
• The unit has sufficient clearance
• The unit is level
• Ambient conditions are within the acceptable range.
If you are in doubt about whether any of the above installation requirements have
been met, refer to the details in Section 7 and verify them before completing the
startup procedure.
You will then be asked to specify unit name, performance mode, and security
mode, as explained in the following sections.
If desired, you can identify an individual freezer by specifying Unit Name on the
screen below.
The Contact Us information is pre-filled with Thermo Scientific information.
To enter unit name or contact information, press the field, then use the
keyboard.
To edit unit name or contact information, press the pencil icon, then use the
keyboard to edit.
Figure 3. Unit Name Screen
Thermo Scientific TSX Ultra Low Temperature Freezers