Key Beep; Pabx Access Code - Motorola IT.5.1XI Manual

8.8

Key beep

When you press a button on the handset, you will hear a beep. You can switch this
on or off.
Press Menu, scroll
1.
2. Set Handset is highlighted. Press Select.
d
3. Scroll to Key Beep
d
u
4. Scroll or to
5. Press e to return to standby.
8.9

PABX access code

If the IT.5XI is connected to a switchboard, you may need to enter a one-digit
access code in the dialling sequence to be able to connect to the outside line.
The access code will be displayed at the beginning of a number on the screen.
The code can be up to 4 digits long.
The access code will not be used when you dial the number manually (such as
when you are not dialling from the phonebook). This allows you to make calls to
other switchboard extensions.
Press Menu, scroll
1.
2. Set Handset is highlighted. Press Select.
d
3. Scroll to PABX Access Code
d
u
to Off,
4. Scroll or
If you select Set
press Save.
5. Press e to return to standby.
Handset settings
d
Settings and press Select.
to
and press Select.
Off On then press Select.
or
d
Settings and press Select.
to
and press Select.
On Set Code
or
Code, enter the switchboard access code e.g. 9 then
then press Select.
33