Handset Name; Language; Key Beep; Battery Low Warning Beep - Motorola STARTAC S12 Manual

5.4

Handset name

If you are using more than one handset with your S12 base, you can set a personalized
name for each handset to easily distinguish between them.
A name can be up to 10 characters long.
m
1. Press , scroll
d
2. Scroll to NAME
3. Enter the new handset name and press
B
pressing .
NOTE
The handset name will only be displayed for approximately 20 seconds when no button is
pressed. If you make a mistake, press
See "ENTERING NAMES" and "WRITING TIPS" on page 19.
5.5

Language

m
1. Press , scroll
d
2. Scroll to LANGUAGE
u d
3. Press or to select your preferred language and press
5.6

Key beep

When you press a button on the handset keypad, you will hear a beep. You can switch
these beeps on or off.
m
1. Press , scroll
m
2. Press to select. The display shows KEYTONE.
m
3. Press to select.
u d
4. Press or to select
5.7

Battery low warning beep

When the battery is almost fully discharged, you will hear a warning beep every minute
during a call. You can switch these beeps on or off.
m
1. Press , scroll
m
2. Press to select.
d
3. Scroll to LOW BATTERY
u d
4. Press or to select
22
d
to HANDSET and press
m
and press .
B
d
to HANDSET and press
m
and press
d
to HANDSET and press
ON or OFF and press
d
to HANDSET and press
and press
ON or OFF and press
m
.
m
to confirm. Delete the current name by
to delete the last character or digit.
m
.
.
m
. The display shows BEEP.
m
to confirm.
m
. The display shows BEEP.
m
.
m
to confirm.
m
to confirm.
Handset settings