L3 Mobile-Vision BWX-100 User Manual page 53

Table of Contents

Advertisement

Configuring BWX-100 to Work with DES
12 Enter the appropriate IP addresses in the Ethernet IP, Ethernet Mask, and Ethernet
Gateway IP fields.
13 If this BWX-100's Uplink Station is connected to the same network as your DES
server (default), proceed to the next step.
– OR –
If this BWX-100's Uplink Station is connected to a different network than your DES
server (such as a router between the Uplink Station and the L3 server), enter your L3
server IP address(es) in the Remote Broadcast IP(s) field. If there is more than one
address, separate each address with a space.
14 If this device will be recording in a region that observes daylight savings time
(default), proceed to the next step.
– OR –
If this device will be recording in a region that does not observe daylight savings
time, deselect the Daylight Savings Time checkbox.
15 If this device will be recording in the Eastern time zone (default), proceed to the next
step.
– OR –
If this device will be recording in a different time zone, select a new value from the
Time Zone drop-down list.
16 To record both audio and video (default), proceed to the next step.
– OR –
To record video only, select 1 from the Audio/Video Mode drop-down list.
– OR –
To record audio only, select 2 from the Audio/Video Mode drop-down list.
17 Enter an agency identification code in the Agency Id field. If you save this record
without entering this field, the system will populate this field with a default value of
0x00000000.
18 To leave the video resolution set to full high definition (default), proceed to the next
step. Otherwise select a new value from the Resolution drop-down list. For a detailed
description of these options, see the table on page 43.
19 If you want the device to vibrate once every X minutes after a recording is initiated—
reminding the officer that a recording is still in progress—enter a number between 1
and 30 in the Recording Alert Time (minutes) field. Otherwise proceed to the next
step.
BWX-100 User's Guide
L3 Mobile-Vision  5.8.2018
P a g e 49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents