Operating Procedures
Performing a Self-Test
The SELF TEST feature performs a series of system checks on your BWX-100.
Perform this procedure when instructed to do so by an L3 Mobile-Vision Service
professional.
1 Hold the BWX-100 so that the LCD menu is visible.
2 Press the
3 Press the
4 Press
ing the alphabet. This will take approximately one minute. As the test nears its end,
the device icons will display one at a time.
When the test is complete, the device will vibrate/chirp three times and the word
READY will redisplay.
Your next step is to review the test status (PASS or FAIL).
5 Press the
6 Press the
7 Press the
8 Press the
If PASS displays, it indicates that your device passed all components of the test. End
of Procedure.
If FAIL displays, it indicates that your device failed one or more components of
the test.
Your next step is to review the test results.
9 Press the
BWX-100 User's Guide
L3 Mobile-Vision 5.8.2018
or
button until SELF TEST displays.
button. The words RUN SELF TEST display.
again to begin the test. A series of characters will display on-screen, includ-
or
button until SELF TEST displays.
button.
or
button until the word STATUS displays.
button.
or
button until the word BACK displays.
P a g e 29