Stopping A Recording - L3 Mobile-Vision BWX-100 User Manual

Operating Procedures
Problems? If you attempt to start a recording and the device chirps three times, it means that
your device is either low on battery power or storage space. When this occurs, look at
the LCD screen:
 If the words STORAGE FULL display and the Battery icon is blinking, you need
 If the words BATTERY LOW display and the Battery icon is blinking, place the

Stopping a Recording

1 To stop a recording in progress, press the Record button for two seconds. The
following indicators confirm that you have successfully ended your recording:
 The Power/Record LED on the top of the device turns green
 The Recording-in-Progress LED on the front of the device turns off
 The device vibrates once and chirps twice
 The LCD screen displays the words STOPPING RECORDING, followed by
 If SELECT CATEGORY displays, proceed to the next step.
 If READY displays, it means that your BWX does not currently have any video
categories on it. End of Procedure.
2 Press the
To assign the first category to your video, press
– OR –
To assign a different category to your video, proceed to the next step.
3 Continue pressing the
4 Press the
NOTE: If you're interrupted while performing this procedure and the READY screen
displays, it means you've missed your chance to tag the video in the field. In that
case, you'll have to make the category assignment from within DES.
*
If the device chirps three times, it indicates that your device is either low on battery power or storage space.
BWX-100 User's Guide
L3 Mobile-Vision  5.8.2018
to upload your videos right away. To do so, place the device in your agency's
Uplink Station. After the videos upload, try recording again.
device in a docking station that's connected to a power source. Once the word
CHARGED displays on the LCD screen, try recording again.
either SELECT CATEGORY or READY.
button. Your first video category displays.
 
or
button. The device assigns the displayed category to your new video.
*
again. End of Procedure.
button until the desired category displays.
P a g e 13