Turning The Device On; Starting A Recording - L3 Mobile-Vision BWX-100 User Manual

To turn the BWX-100
on, simultaneously
press the Snap/Trace
and Mute buttons

Starting a Recording

1 To start a recording, first make sure the device is powered on and the word READY
displays on the LCD screen. (If necessary, review "Turning the Device On" above.)
2 Press the Record button for two seconds. The following indicators confirm that you
have successfully initiated a recording:
 The Power/Record LED on the top of the device changes from green to red
 The Recording-in-Progress LED on the front of the device turns red
Success!
 The device vibrates twice and chirps once
 The
To start or stop
a recording, press
here for two seconds
As long as a video is in progress, the LEDs will remain solid red. (Exception: When
Covert mode is on, audio-visual indicators will be suppressed.)
If you activated the Recording Alert feature in DES, the device will also vibrate
every X
*
Where X = the Recording-in-Progress time interval entered in DES
P a g e 12

Turning the Device On

To turn your BWX-100 on, simultaneously press the Snap/Trace
and Mute buttons until the device vibrates. Next, release the
buttons and wait for the device to boot. This will take approximate-
ly 30 seconds. During this time, the LCD screen may be blank for
several seconds. Don't worry—the device is still booting.
When the boot is complete,
the device vibrates/chirps, the
Power/Record LED turns
green, and the word READY
displays on the LCD screen.
icon and the word RECORDING
display on the LCD screen.
*
minutes as long as a video is in progress.
Operating Procedures
Recording-in-Progress icon
LEDs
BWX-100 User's Guide
L3 Mobile-Vision  5.8.2018