Configuring Bwx-100 To Work With Des - L3 Mobile-Vision BWX-100 User Manual

7 Make sure the following options are selected:
8 Click OK.
9 Close all the windows that you opened during this setup process.

Configuring BWX-100 to Work with DES

Before you begin using your BWX-100, you must change certain settings in DES.
As with Flashback videos, BWX-100 videos are typically linked to a particular
officer, that is, the officer who recorded the video or captured the snapshot. To create
this link, DES includes an Officer Dispatch feature that is somewhat similar to the
USB Login Key feature used with Flashbacks. Specifically, the Officer Dispatch
feature allows you to assign different BWX-100 devices to different officers each
shift. This allows multiple officers working different shifts to share a limited number
of BWX-100 devices. Once an officer completes his shift and places the BWX-100
back in its docking station, the system uploads that device's files and flags the device
as "In" (i.e., available). You may then reassign that DVR to a different officer.
Alternately, some agencies may choose to assign one "take home" BWX-100 to each
officer. This eliminates the need for the Officer Dispatch feature. Instead, you simply
enter each officer's name on their BWX-100 record. In the future, all videos recorded
on that device will then be linked to that officer.
WARNING: Under certain circumstances, your L3 Mobile-Vision Service profes-
sional may provide you with a procedure used to reset the configuration file within
your BWX-100 device. If you are familiar with this procedure, do not use it again
unless instructed to do so by an L3 Mobile-Vision Service professional! Doing so
could interfere with DVR-to-server communication, making it impossible for you to
upload your videos to the server.
P a g e 34
Configuring BWX-100 to Work with DES
BWX-100 User's Guide
L3 Mobile-Vision  5.8.2018