Operating Procedures
Detaching the Magnet Mount from the Camera
1 Place the BWX-100 in one hand while you stabilize the B plate with your thumb.
2 Press the release button down with one thumb while you rotate the B plate counter-
clockwise with another finger.
3 Pull the magnet mount up and off the camera.
Operating Procedures
Proceed to the desired topic:
Turning the Device On, next page
Starting a Recording, next page
Stopping a Recording, page 13
Capturing a Snapshot and/or Inserting a Tracepoint, page 14
Turning 'Covert' Mode On/Off, page 15
Checking Remaining Record Time, page 16
Checking Remaining Battery Power, page 16
Turning Audio Mute On/Off, page 17
Uploading Videos to DES, page 18
Charging the BWX-100, page 22
Viewing Officer Information, page 24
Viewing Device Information, page 24
Viewing Your BWX-100's IP Address, page 27
Remotely Triggering a Recording, page 28
Performing a Self-Test, page 29
Turning the Device Off, page 30.
BWX-100 User's Guide
L3 Mobile-Vision 5.8.2018
B
P a g e 11