Operating Procedures
e) Use an Ethernet cable to connect the back of the server switch to an Ethernet port
(Continued on page 21)
Figure 1: Uplink Station with Optional Power Adapters
Docking stations
BWX-100 User's Guide
L3 Mobile-Vision 5.8.2018
Use one power adapter per docking station, as pictured in Figure 1 below.
Because each of your BWX-100s comes with a power adapter, this option does
not require any additional equipment.
– OR –
Use one power adapter per six docking stations, as pictured in Figure 2 on
page 20.
– OR –
Use a server switch that has POE (power over Ethernet) ports. This will eliminate
the need for any power adapters, as POE ports provide both server access and
power. See Figure 3 on page 20.
on your DES storage server.
Ethernet cables
Single power
Adapter
DES
Server
*
DEV customers connect to a PC
P a g e 19