L3 Mobile-Vision BWX-100 User Manual page 52

9 If your agency plans to use the BWX-100's Snap/Trace button to capture a "snap-
shot" still image and insert a "tracepoint" place marker in a recording (default),
proceed to the next step.
– OR –
If your agency plans to use the BWX-100's Snap/Trace button to capture a "snap-
shot" still image only, select Snapshot from the Snapshot/Tracepoint drop-down list.
– OR –
If your agency plans to use the BWX-100's Snap/Trace button to insert a "tracepoint"
place marker only, select Tracepoint from the Snapshot/Tracepoint drop-down list
– OR –
If your agency wishes to disable the BWX-100's Snap/Trace button, select Off from
the Snapshot/Tracepoint drop-down list.
10 If your agency is using the remote triggering function
Remote Triggering drop-down list. For more information on this feature, see page 28.
– OR –
If your agency is not using the remote triggering function (default), proceed to the
next step.
11 If your agency is running your DES product
step 13.
– OR –
If your agency is not running your DES product
Ethernet DHCP checkbox.
* Additional equipment may be required
*
DEP, DEA Agency, DEF, or DEV
P a g e 48
Configuring BWX-100 to Work with DES
*
, select Enabled from the
*
on a DHCP network (default), skip to
*
on a DHCP network, deselect the
BWX-100 User's Guide
L3 Mobile-Vision  5.8.2018