Charging Via A Stand-Alone Docking Station; Battery Safety & Usage Guidelines - L3 Mobile-Vision BWX-100 User Manual

Operating Procedures

Charging via a Stand-Alone Docking Station

The docking station that is included with your BWX-100 can be used to charge your
device regardless of whether it's currently connected to an Uplink Station. Just make
sure that the docking station is connected to a power source.
WARNING: Do not plug the micro USB plug directly into the bottom of your BWX-
100. Rather, place the BWX-100 in a docking station, and plug
Battery Safety & Usage Guidelines
Battery performance will vary based on power management settings, video resolution
and environmental conditions. As with all batteries, maximum capacity decreases
with time and use and will need to be replaced by an L3 Mobile-Vision Service
professional at least every 12 months. Battery life and charge cycles vary by use and
settings.
 Do not mishandle or drop the BWX-100. Doing so could damage the device or
 Do not charge the BWX-100 with a device other than the factory supplied
 If there is noticeable damage to your BWX-100, do not attempt to charge the
 Never charge the BXW-100 when the device is above 113° F.

 Avoid exposing the device to extreme temperatures for an extended period of
BWX-100 User's Guide
L3 Mobile-Vision  5.8.2018
its battery, cause serious personal injury, or result in smoke or fire.
chargers. Doing so could cause serious personal injury or result in smoke or fire.
device. Doing so could damage the device or its battery, cause serious personal
injury, or result in smoke or fire. Rather, contact L3 Mobile-Vision Service for
assistance at 800-336-8475.
Replace the battery every 12
Service for assistance. Do not attempt to change the battery yourself.
time, such as leaving the camera unattended in a vehicle where the interior or
trunk of the vehicle may get very hot or cold. Do not expose the device to
months. To do so, contact L3 Mobile-Vision
P a g e 23