Operators Panel - SATO M-84PRO Operation Manual

Section 2. Installation
OPERATOR PANEL
The M-84PRO Operator Panel consists of five LED indicators, two momentary contact switches, three
DIP switches, four adjustment potentiometers and one LCD Display. All of these are accessible from the
front of the printer. They are used to set the printer operating parameters and to indicate the status of the
printer to the operator. After you power on the printer, familiarize yourself with the keys and indicators as it
will help you understand the configuration process
PRINT
OFFSET
PITCH
DISPLAY
POWER
LABEL
RIBBON
ERROR
Page 2-8
Potentiometer to adjust print darkness (fine tuning)
Potentiometer to adjust amount of back/forward feed for dispenser/cutter/
tear-off position (+/- 3.75 mm)
Potentiometer to adjust home position of the label (+/- 3.75 mm). Affects stop
position of label feed, print position and dispense position.
Potentiometer to adjust the contrast of the LCD display.
LED, illuminated when the power is on.
LED, illuminated when the label supply is not detected.
LED, illuminated when the ribbon motion sensor does not detect any ribbon
motion (ribbout out condition).
LED, illuminated when there is a system fault such as an open print head.
.
Operation Manual
SATO M-84PRO